Damage Roof Inspections

Visual Damage Roof Inspections are provided by licensed engineers and experienced technicians a set of ‘eyes’ during all phases of the installation. Critical areas such as fastening patterns of underlying insulation, mopping techniques, or glue application and drying times can be monitored for compliance with the contract documents and manufacturer’s standards.

EMA’s Damage roof inspections have extensive experience to observe all phases of a roof installation to ensure materials are in compliance with project documents. Prior to the start of work, our inspectors are provided specifications, drawings, shop drawings and submittal. The inspector’s attendance at the Pre-Job Conference with respective contractual parties allows a thorough understanding of the system installation, set-up areas and anticipated internal disruptions. The inspector generates Damage Roof Inspection Reports which delineates material and installation compliance, and documents any unforeseen contingent items to the contract. Non-compliance issues are immediately addressed with the roofing contractor, design professional or building owner to ensure proper installation of the specified roofing assembly. We provide roof inspection in, St. Augustine, Palm Coast, Palm Bay, Cocoa, Rockledge, Daytona Beach, Melbourne, Orlando, & Tampa.

hurricane damage roof inspections by EMA engineers Florida — Damage Roof inspections for residential and commercial structures

Roof Inspections by Licensed Engineers.

EMA roof engineers can inspect and perform damaged roof inspections daytona, Cocoa, Ormond beach, Palm Coast on any roof system including concrete roofs, gravel and shingled roofs. After hurricanes, or natural disasters including lightening strikes the roof may get damaged. That is where we send our professional engineers and inspectors to do a thorough inspections of roofing and intent of damages for insurance claim purpose and repairs.

We also perform various structurally damaged roof inspections including initial tig-tag , structural in progress and structural final inspections for shingled, tile roofs. We also perform roof static uplift test TAS-105, TAS-106, Bell Chamber (TAS-124), Thermal Imaging etc. Various Services are performed and a Sealed and Signed report is prepared for the client.

We also perform damage roof inspections for all shingle, metal & clay tile or concrete tile roofs after any storm or hurricane as per Florida building code chapter 15. please call for our services.

daytona roof inspections — Damage roof inspections

Damage Inspections & Testing.

EMA Engineers performs detailed, professional damage roof inspections in Volusia, Flagler, Duval, Indian River, Brevard, Orange, Polk, Lake counties with state-of-the-art moisture detection devices and gives thorough explanations with digital pictures.

Roof Damage Inspection Procedure.

The starting point of the roof Inspection Daytona should be the roof of the building. The interior walls and ceilings should be checked for signs of water staining. After inspecting the interior by a damaged roof inspections engineer thorough inspection of the exterior walls should be made along with the roof system.

The following roof components should be inspected:

Flashing: These are the protection for the membrane termination and often provide a waterproof cover at the membrane termination. These include Counter- flashing, expansion joint covers, copings and flashing at walls and curbs. A variety of problems may occur at these vulnerable locations by damage roof inspections throughout East and Central Florida as well as Tampa, Orlando & Ft. Lauderdale.

Penetrations: These are pipes, drains, vents, stacks and other items that penetrate the roof membrane. These MUST be flashed properly to assure a watertight roof system by roof engineers.

Field Membrane – What to look for:

· Open seams excessive blisters, wrinkles, ridges or areas of non-adhered membrane.
· Worn spots holes or deteriorated areas of the membrane.
· Deteriorated, areas of surface coating on the membrane.
· Adequate, drainage and ponding problems of the membrane checked by roof inspections.
· Areas around rooftop equipment that may have been degraded by leaks or spills or punctured by dropped equipment parts.

How to Inspect damage Roof inspections Types

The first protection any house has against the elements is the roof and there are a variety of roofing materials. You can learn a few basics about each material that will help you spot damage that needs to be repaired or roofing that should be replaced as reported in roof inspections.

Shingles damage roof inspections

Asphalt roofing surfaces are granular. When asphalt shingles age they become brittle from the sun and other elements. Then the granules can detach from the shingles. Check in the gutters and at the end of the downspouts for asphalt granule deposits. Inspect the roof for spots that look bare where all the granules have detached and been washed away. Also inspect for missing, torn or warped shingles. When the edges or corners of shingles are rising or curling, they have outlived their usefulness and will need replacing. Also look for indentations or punctures from hail damage. This can be far more costly than simply adding shingles so knowing how many layers are on the roof and the legal limitations can be valuable. You can commonly determine how many layers are present by examining the edge of the roof during damage roof inspections.

Metal Damage Roof Inspections

Metal roofs are commonly steel, copper, aluminum, or galvanized iron. Most metal roofs have a life expectancy of about 50 years. Perforations, pits, rust, or corrosion can help determine the age of the roof. Check the seams, corners, and joints for loose, dried out, or peeling caulk or other seam material while performing damage roof inspections.

Slate or Clay Tile metal Roof Inspections

Inspections of 3 most common tile roof materials and these are concrete tile, clay or terracotta tile, and composite or light weight tiles. The most common tile is made of concrete and you can identify these roofs by the thickness and absence of color on the bottom or underside of the tiles. They often have 75 years or lifetime warranties. However they can leak sooner depending on the quality of workmanship. Local codes and the area of the country will require these tiles be attached with nails, construction adhesives, battens, screws, foam, or a combination of fasteners noted during damage roof inspections.

Composite tile damage roof inspections are not as popular and are made to resemble clay tile. They are principally installed on homes that lack the structural ability to hold much heavier concrete. Composite tiles also cost less to install.

Clay tile Damage roof inspections comes in two types: terracotta and sand cast. Terracotta tile look just like the material of clay flower pots. Sand cast tiles come in different colors noted during damage roof inspections.

Slate and clay tile roofs and even cement shingles are designed to last as long as the structure when cared for properly. However they can be broken by hail, ice, or by walking on them. Avoid walking on these materials and use a drone or binoculars to look for any missing tiles or ones that are chipped or broken roof inspections.

Wooden Shakes Damage roof inspections

This is another roofing material you should not be walking on. Inspect these roofs from a ladder, with binoculars or a drone camera. Wooden shakes are split by hand, and wood shingles are sawed and tapered. Weather will deteriorate wood shakes and shingles over time. See if there are missing rotted, warped, or broken shingles or shakes. As a general rule of thumb if a third or more of these roofs are damaged, the whole roof needs replacement.